Series 224 Mechanical Pneumatic Valve 3/2 & 5/2 - 1/4"
Pneumax Series 224 Mechanical Pneumatic Valve 3/2 & 5/2 - 1/4"
3/2 or 5/2 mechanical spool valve with 1/4" working port connection and 1/8" pilot port. Available in either Pneumatic - Spring or Pneumatic - Pneumatic.
The Pneumatic - Spring mechanical spool valve operates via an air pilot and spring return. This valve operates similar to a solenoid in the fact that the communication signal is remote. Minimum working pilot pressure 2.5 bar.
The Pneumatic - Pneumatic mechanical spool valve operates via an air pilot supply for both directions to drive the valve. This valve operates similar to a solenoid in the fact that the communication signal is remote. Minimum working pilot pressure 2 bar.
The body is manufactured in robust aluminium and seals are all in NBR rubber. Suitable for use with compressed air with or without lubrication.
Key Features:
- Aluminium body
- NBR seals
- 3/2 or 5/2 versions
- Working port size: 1/4"
- Pilot port size: 1/8"
- Orifice size: 8mm
- Working Pressure:
- 2.5 - 10 bar (Pneumatic-Spring)
- 2 - 10 bar (Pneumatic-Pneumatic)
- Flow at 6 bar: 540 Nl/min
- Temperature range: -5°C to +70°C
- Fluid: Compressed air with or without lubrication
Datasheet:
Manufacturer | Pneumax |
---|---|
Operator | Air Piloted |
Position | 3/2, 5/2 |
Connection | 1/4" |
Series | 224 |
Material | Aluminium |
The following downloads are available for the Pneumax Series 224 Mechanical Pneumatic Valve: